W10 automatic two roller rolling machine is a new bending machine. The two roll plate rolling machine can be formed at one time, the production efficiency is high, the product geometric precision is high, the surface quality is good, the structure of bending equipment is simple and the number of rollers is least, and the operation is simple and convenient. The two roller bending machine is used widely, fast batch manufacturing thin-wall pipe, ventilation pipe, chimney, filter, solar water heater, automobile exhaust pipe, a liquid storage tank (gas) and so on.
The hydraulic automatic two roll plate rolling machine is a roll plate specially used for large cylinder. It breaks the conventional two roll plate rolling machine to take the workpiece from it. The workpiece is directly slipped out by the hydraulic lifting raceway below. It is convenient and light to take the parts. It is the ideal choice for the large type (weight) roll plate.
Steel plate in the upper roller (two roll) under the roller (elastic roll) through the upper roll pressure. The elastic layer of the lower roller is formed into a concave shape to cause the steel plate to be bent.
The ability and efficiency of the machine are determined according to different structure forms and control means.
The two roll hydraulic automatic rolling machine is mainly used for rolling cylindrical workpiece, carbon steel plate 0.3-4.0MM and stainless steel 0.3-2.5MM. Advantages: quick, quick forming, precise and no straight edge, and the roundness of rolled workpiece is guaranteed in the range of 0.5MM.
First, add the hydraulic oil into the fuel tank.
Second, connect the power, start the pump motor and ensure that the rotation direction is correct.
The feeding platform position should be adjusted properly.
Select the required rolling size mould, rolling die and sleeves on the driven shaft according to the parameters of plate bending machine (rolling machine).
Finally, turn on the control switch automatically, and then you can start rolling.
Turn on auto manual switch on the control box and remove the steel sleeve in the driven shaft.
Remove the workpiece after rolling.