Sunrise Plate Rolling Machine Co., Ltd. >> News >> Technical Parameters Description >> Main component structure of steel three roller rolling machine

Main component structure of steel three roller rolling machine

Three roll plate machine can roll the metal sheet into a circular, arc and a conical workpiece in a certain range.

(1) Up and down roll: as an important part of the rolling machine, the material is made of high quality carbon steel for forging.
(2) Frame: one of the left and right frames, and the lower roller bearing on the frame. There is a square screw thread bar inside the frame, and the upper end of the silk rod is articulated with the bearing seat at both ends of the upper roller.
(3) Reducer: the ZSY280 hard face reducer is installed on the channel steel base with the cushion high.
(4) Electrical part: all installed in a control box, easy to operate.
(5) Unloading device: load balance roll when loaded on one side of reducer; finish unloading and recovery by oil cylinder.
(6) Base: welded by steel and steel. The frame, the reducer, the motor and so on are installed on it to form a whole.

Related Posts